Bertazzoni Refrigerators REPLACE FILTER Error: Water filter near end of life
What Does Replace filter Mean? The Replace filter message appears on Bertazzoni refrigerator columns — including models in the Professional Series and Master Series equipped with an internal water dispenser or ice maker — when the control board calculates that the water filter cartridge has processed roughly 70% of its rated volume. This is a […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. The refrigerator is safe to use. The reminder appears before the filter is fully exhausted, giving you time to order and install a replacement. For best water and ice quality, replace within the next 2–4 weeks.
Can I reset the code?
Yes. After installing a new filter cartridge, press and hold the Reset or Enter button on the control panel for 3 seconds to clear the reminder and restart the usage counter.
When to stop immediately?
Stop if you notice: Water from the dispenser develops an unusual taste or odour even with a recently installed new filter — the water supply itself may need inspection.
Symptoms You May Notice
Ice cubes taste slightly off or have a flat, stale flavour
As the activated carbon in the filter cartridge becomes saturated, its ability to adsorb chlorine and contaminants decreases. Ice produced by the ice maker may carry a mild chlorine or plastic taste that was absent with a fresh filter.
Water dispenser flow rate is visibly reduced
Increased restriction across the partially clogged filter slows the water flow to the dispenser. You may notice the dispenser takes noticeably longer to fill a glass compared to when the filter was new.
Replace filter notification appears on the control panel
The control board displays a "Replace filter" message when the usage counter indicates approximately 30% of filter life remains, giving you advance notice to order a replacement cartridge before complete exhaustion.
Possible Causes
Filter cartridge approaching rated water-volume capacity
The standard Bertazzoni filter cartridge is rated for approximately 300 gallons (or 130 days of average use). Once this volume is processed, the activated carbon media is saturated and filtration efficiency declines.
DIY PossibleUsage counter not reset after previous cartridge replacement
If the filter was replaced but the usage counter was not manually reset via the control panel, the counter will trigger a premature reminder at the next calculated interval. The filter itself may still have useful life.
DIY PossibleSafe Checks You Can Do
-
1
Replace the filter cartridge
Locate the filter housing (on most Bertazzoni columns it is in the upper right corner of the refrigerator interior or behind the toe-kick). Turn the old cartridge counter-clockwise one quarter turn and pull it out. Insert the new Bertazzoni-approved cartridge, turn clockwise to lock, and run 2 gallons of water through the dispenser to flush the new media.
Only use Bertazzoni-approved or NSF-certified replacement cartridges. Third-party filters may not seat correctly and can void the warranty.
-
2
Reset the filter usage counter
After installing the new cartridge, navigate to the Filter menu on the control panel and press and hold the Reset or Enter button for 3 seconds until the reminder clears and the counter returns to 100%.
The exact reset sequence varies by model — refer to the section "Replacing the Water Filter" in your Bertazzoni user manual for your column series.
When to Call a Professional
Contact a qualified technician if:
- Filter housing leaks water after cartridge replacement — the housing O-ring or housing itself may be cracked and requires a service visit
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Refrigerators Repair Service Schedule Appointment